The first round of retests comprised the first retests on Standards 11–1and 15 from Quiz 3, and the second retests of Standards 1–6 from Quiz 1. Each standard had its own retest quiz on Canvas.
The table below shoes the criteria for satisfying the standards. The first column gives the name of the quiz. The second column gives the total number of points attainable in the retest, and the last column tells the number of points needed to satisfy the standard.
| Quiz | Points | Cutoff |
|---|---|---|
| Standard 1 Retest 2 | 3 | 3 |
| Standard 2 Retest 2 | 3 | 3 |
| Standard 3 Retest 2 | 6 | 5 |
| Standard 4 Retest 2 | 3 | 2 |
| Standard 5 Retest 2 | 2 | 2 |
| Standard 11 Retest 1 | 3 | 2.5 |
| Standard 12 Retest 1 | 5 | 4 |
| Standard 13 Retest 1 | 5 | 4 |
| Standard 15 Retest 1 | 16 | 12 |
Two questions on heat transfer mechanisms, one calculation question plug-and-chug for the Fourier heat conduction law (but requiring unit conversions). Important unit conversions are 10,000 cm = 1 m3 and 1000 mm = 1 m.
1. The important concern is to minimize the importance of intermolecular interactions.&nbnsp; Low density makes excluded volume a smaller fraction of the total volume, and high temperature reduces the importance of intermolecular attraction or repulsion.
1. The entropy change of the house is −Q/Th. The entropy change of outdoors is Q/Tc. The entropy change of the universe is Q(1/Tc−1/Th).
2. For this problem, the temperature changes as the rock loses heat, so we can’t just use Q/T, we have to integrate it. dS = dQ/T and dQ = mc dT, giving ΔS = mc ln(T2/T1).
3. This one is solved by ΔS = k ln(Ω2/Ω1), where Ω2/Ω1=(V2/V1)N.
1. Heat engine efficiency is W/Qh.
2. We are given W and Qc and told to find e. For this we need Qh = W + Qc, so e = W/(W+Qc).
3. Heat pump COP = Qh/W.
4. Given Qh and W, we can just plug and chug.
5. Here it’s necessary to use kelvin temperatures, so we must convert from Celsius.
These questions were supposed to be lollipops. Everyone was supposed to get all of them correct.
1. Most knew that electric charges are positive or negative.
2. Gravity only attracts; electricity attracts or repels.
3. Drawing a picture of the two charges may have allowed you to visualize the situation. This is a plug-and chug; you need to know the square of the distance between the particles (can deduce from their positions), their charges (given), and the proportionality constants.
4. Diagram should be obvious if you sketched the placement of the charges. Don’t ignore the obvious aids.
5. We can find the direction toward particle B, knowing that its tangent = −6/3. Then, because the x component is negative, add 180°.
I think the correct answers to the questions explain themselves. Some ideas to remember when answering these questions is that the electric flux through a closed surface is positive if the electric field is directed outward from its interior, and negative if the field is directed inward from its exterior. The numerical value of the flux is directly proportional to the net charge enclosed by the surface. The electric field inside a static conductor is zero.
1. Charge enclosed: The only item inside this surface is a +Q charge.
2. Flux: Apply Gauss’s law to the enclosed charge.
3. Flux: The surface is entirely within a conductor, so the field is zero at all points on the surface. The flux can only be zero.
4. Charge: Apply Gauss’s law to the flux of zero to find the enclosed charge.
5. Flux: inside a conductor, field is zero, so the flux must be zero.
6. Charge: Zero flux requires zero total enclosed charge.
7. Flux: Inside a conductor, field is zero, so the flux can only be zero.
8. Charge: Apply Gauss’s law to zero flux to conclude that the net enclosed charge is zero.
9. Charge: Enclosed within the surface are charges of −2Q and +Q, giving a net charge enclosed of −Q.
10. Flux: Apply Gauss’s law to the enclosed charge to find the flux.
11. Charge on inner skin: The inner skin must cancel the charge of the interior particle, so −Q.
12. Net charge internal to the conductor must be zero, because any Gaussian surface inside the conductor encloses zero net charge.
13. Charge on the outer surface can only be +Q, to make the total what it needs to be.
Copyright © 23 October 2024.
Revised: 5 November 2026. Maintained by Richard Barrans.
URL: http://www.barransclass.com/phys1220/exams/P1220_F26_R3_crit.html